4 Essential Precautions for Installing Your Solar Power System

Blog

Installing a solar power system in your home can be a dangerous and difficult process. In general, this project will require the manual placement of the panel on the roof for the optimal harnessing of solar energy. Also, it is essential for the panels to be connected to the house for power supply and even storage. If you are not cautious, you could sustain injuries from falls and electrical shock. Therefore, it is advisable to consult a professional electrician for help to ensure safe and effective system setup. If you are interested in DIY installation, consider these core safety guidelines.

1. Check the Crucial Codes

When installing your solar power system, you must check the applicable building codes and regulations first. Setting up the components without considering the rules which have been set in your local area can cause unnecessary complications. For instance, your house will be unsafe, and electrical mishaps might occur. Also, if your connections are not up to the required standards, your insurance coverage might be affected. In addition, you might be forced to reinstall the system in the future.

2. Plan for Elevated Access

The most convenient spot for placing solar panels is your residential roof. It is possible to place them on the ground on suitable stands. However, you will only get optimal sun coverage on your elevated roofing. Unfortunately, this part of the installation process can be dangerous. It is imperative for you to get a professional to help avoid accidents. If you must handle this task, find a suitable scaffold, ladder or another similar elevated platform. Also, consider using fall protection and footwear with good traction.

3. Think About Insulation

You should not assume that you are safe from electrical shock when working with solar power wiring. Therefore, when wiring the system for power supply, it is advisable to plan for insulation as a precaution. This is crucial even if the risk is low. You should acquire insulated gloves for direct wire handling and insulated tools for installing the hardware. It is also a good idea to take off conductive items like metal watches from your body.

4. Inspect the Components

You should conduct an inspection of the solar system components before and after installation. In simple terms, you should make sure that the delivered power elements are in optimal condition before setting up. Otherwise, you might need to perform repairs or modifications immediately afterwards. Then, once the installation is complete, you should conduct a check-up or engage an electrician for an inspection before commissioning operation.

Share

2 June 2019

Best Questions to Ask Electricians and Other Tips and Ideas

Welcome to my blog. My name is Mia. A few years ago, my partner and I bought an old home. It needed to have all new wiring installed, and through that process of working closely with a fabulous electrician, I learned a lot. I learned everything, from which questions to ask, to how to do a bit of wiring on my own. If you are hiring an electrician, you need to explore my posts. I hope they help guide you in the right direction. Now, that our home is finally, for the first time, not in the midst of a repair or project, I decided to start this blog. In addition, I also like to fish and read.